PUMP
The Dayliff DPSolar pool pump is specifically
designed for swimming pools, ponds and water
features where mains power supply is
unavailable. The pump end is made from
premium corrosion free engineering plastic
material and is provided with a large filter basket,
quick release see through lid and inlet and outlet
unions. It is manufactured to standards providing
high efficiency, long life and excellent
serviceability.
CONTROLLER
Pumps are provided with high-efficiency
controllers which is in-built for DPSolar 600 and
separate for DPSolar 1000 with the following
functionalities;
• Over/underload and over temperature
• Low voltage disconnect for battery operation
• Integrated MPPT (Maximum Power Point Tracking)
Graph 1
2
Average Daily Irradiation Values (Kwhr/m )
Jan
Feb Mar Apr May Jun
Jul
Aug Sep
Oct
Nov Dec
1
2
3
4
5
6 5.6
7
6.3
6.5
6.0
5.8
5.6
5.7
5.6
6.5
5.8
5.1
5.3
Graph 2
% Daily Output
6:00 7:00 8:00 9:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00
2%
12%
13% 13% 13%
12%
10%
2%
0%
0%
7%
10%
7%
Time (hrs)
1
1. PUMP SPECIFICATIONS
PUMP HEAD (m)
FLOW RATE (m/hr)
Congratulations on selecting a Dayliff DP Solar Pool Pump. They are
manufactured to the highest standards and if installed and operated
correctly will give many years of efcient and trouble free service.
Careful reading of this Installation Manual is therefore important,
though should there be any queries they should be referred to the
equipment supplier.
0
2
4
6
8
10
12
14
16
18
2 4 6 8 10 12 14
20
16
DP Solar 1100
DP Solar 600
18 20 22 24 26 28 30