33
Maintenance and
Troubleshooting
This section outlines problems you may have and solutions you may be able to use.
Many of the parts in this product are not user-serviceable and should be repaired by
trained professionals. This is especially true of the electrical systems and the mechanical
components. Alteration of these components voids the warranty.
Tire Pressure
Maintain the air pressure in your tires at the appropriate level. If the air pressure is too
low, your mobility scooters performance will suffer and it will become damaged more
easily.
Cold weather and lower temperatures will cause the air pressure in your tires to drop, and
warmer weather will cause it to increase, even if there are no leaks in the tire tube. To
replace the air in your tires, follow this procedure:
1. Identify the required pressure by examining the text along the side of the tire rim.
This text should indicate the recommended pressure for your tire.
2. Locate the air valve on the inner surface of the tire rim.
3. Remove the valve cap and place in a secure location.
4. Place the nozzle end of an air pump (hand-power or mechanical) over the valve.
5. Pump up the air in the tire, being careful not to let the pressure go above the level
prescribed on the side of the tire wall.
6. Remove the pump nozzle from the air valve without allowing much air to escape
from the tire.
7. Replace the valve cap on the air valve.
Maintaining the proper air pressure will allow you to travel much further on a single
charge, because the motor will not have to work as hard to move the Mobility Scooter.
Summary of Contents for Boomerbuggy X Pro
Page 1: ...boomerbuggy x pro manual...
Page 39: ...39...
