6
Powering on the EDF Motors
You will fi nd 8 sets of negative and
positive cables that you will need to plug
together connecting red to red and black
to black.
If you are powering on
ALL
the EDF mo-
tors ensure you turn on a balanced even
set of motors.
Example. If you are powering on two
motors, power the upper left and low-
er right.
Once your desired amount of motors are
connected turn the ignition on as seen
on the previous page.
Please note that the EDF motors do not
have an off switch, so they will continue
to drain your battery as long as they are
plugged in.
We recommend unplugging either the
negative or positive cable when not in
use.
*Minor Sparks are normal when plug-
ging in the EDF motors*
