Daymak SASQUATCH JR, User Manual

8

Items to Carry with the Electric Bike

It is a good idea to carry the following items with you at all times when you ride your atv.

• 

The charger, to charge the bike in case the battery power runs out.

• 

30 Amp Fuse, spares for the batteries, in case the fuses blow (if applicable).

• 

A lock, to secure your atv when you park it.

• 

A helmet, and protective riding gear.

Inspecting your ATV

Always inspect your atv before you ride it, to make sure its safety features are operating 

properly.  Many  accidents  can  be  avoided  with  routine  inspections.  Once  you  are 

comfortable with your atv, you will be able to detect small changes in the way it feels. If 

anything changes between uses, make sure to have it properly examined. Also, be sure 

to listen for changes in the sounds your atv makes over time. Any mechanical or power 

issues may have effects on the sounds the bicycle makes. 

Holding the Handlebars

As with a normal bicycle, place your fingers over the brake levers, using the palms of your 

hand and your thumbs to wrap around and under the handlegrips. Doing this allows you 

to activate the brakes easily, by squeezing your hand, in case you have to stop quickly. This 
is the safe way to control your atv.

Turning your Atv On and Off

To turn on your atv, insert the key into the “ignition”, located just below the dash board, 

and turn the key to the right. When your atv is activated, the power indicator will light and 

the battery charge indicator will jump, showing you how much power your atv has. To turn 

off the atv, simply turn the key to the left, and remove the key.