DownMix
User
Manual
15
Menu
Functions
and
Descriptions
While at the home screen, and not in home screen selection mode, rotate the encoder in any direction
to enter the menu. From this screen you may navigate to the rest of the menu by selecting SYSTEM
MENU. Also displayed are keylock controls and channel audio adjustments.
Selecting KEYLOCK from this menu will lock the front panel controls of the unit immediately. KEYLOCK
SETTINGS sub-menu contains a time-out setting that will enable automatic locking of the controls after
a user-specified time period has elapsed. To disable automatic keylock, select “OFF” from this menu.
Channel Audio Adjustment:
Performs fine adjustment of the audio levels for the following audio
channels (0 to -12dB):
1. Output Lt/Rt Gain – Lt/Rt two channel stereo output level
2. Input L/R Gain - Left Front and Right Front input level
3. Input LFE Gain - Low Frequency Effects input level
4. Input C Gain - Center channel input level
5. Input Ls/Rs Gain – Left Surround and Right Surround input level
6. Input Lb/Rb Gain – Left Back and Right Back input level (not supported)
Systems
Menu
N
avigating to SYSTEM MENU after entering the Main Menu will allow you to change all values to fine
tune the operation of your DownMix.
Settings
Menu
LFE Function:
Defines how DownMix will treat Low Frequency Effects. (Normal or Mute)
LFE Cutoff:
Adjusts low-pass filter for Low Frequency Effects. (0-140Hz in 20Hz Increments)
Output Limiter:
Allows DownMix to reduce the level of the output stream. (0dB to -20dB)
Output Mode:
Sets the output mode of DownMix. (Stereo)
