11
M2A-FM User Manual
•
If “SET” is selected, submenu for “Alarm Delay” with “30”, “60”, “120” and “240” second
options is displayed next. Use UP and DN switches to toggle the setting and highlight the
desired option.
A L A R M D E L A Y
3 0 > 6 0 < 1 2 0 2 4 0 S
Push “SELECT” switch to save and increment the menu to the next alarm function.
Alarm Output 6 – Over Modulation
•
The Carrier Over Modulation alarm is factory set to alarm for a level over 105% by
default. Select “SET” to set this alarm and continue with alarm configuration menu;
select “OFF” to set this alarm function to off. Push “SELECT” to continue.
O V E R M O D U L A T I O N
>
S
E
T
<
O
F
F
•
If “SET” is selected, submenu for “Modulation Level” is displayed next. Use UP and DN
switches to vary the setting between 100 – 125%. Set the Modulation to the desired
trigger level. Push “SELECT” to continue.
M O D U L A T I O N L E V E L
- 1
0
5
%
+
•
If “SET” is selected, submenu for “Alarm Delay” with “30”, “60”, “120” and “240” second
options is displayed next. Use UP and DN switches to toggle the setting and highlight the
desired option.
A L A R M D E L A Y
3 0 > 6 0 < 1 2 0 2 4 0 S
Push “SELECT” switch to save and increment the menu to the next alarm function.
Audible Alarm Buzzer
•
Highlight desired “ON” or “OFF” option using UP and DN switches to toggle the setting.
Select “ON” for audible alarm to beep during any active alarm condition and continue
with alarm configuration menu; select “OFF” for audible alarm to be silent during any
active alarm condition.
A L A R M B U Z Z E R
>
O
N
<
O
F
F
Push “SELECT” to continue.
