DAYSTAR FILTERS
SOLAREDI 66
Congratulations on your purchase of a SolaREDi 66 Hydrogen Alpha
solar telescope. Please read this manual before using the product.
To use the telescope, plug in the included power supply, then insert
a diagonal and eyepiece (not included) in the rear of the telescope
and set the focus to about 5½. Turn the tuning knob to point
straight away from the indicator light. When the light turns green in
about 5-15 minutes your viewing experience can begin.
Warnings:
Do not disassemble the filter, the blocking element is separated from the
etalon and the complete assembly must be used together for safe
viewing.
Do not power the filter from a computer or cell phone charger as the
SolaREDi 66 requires a high current power supply (> 1.5A) for operation.
For assistance:
Call:
1 (866) 680-6563
Email: service@daystarfilters.com
Visit:
http://www.daystarfilters.com
