Specifications:
Wavelength:
6562.8Å
Tuning knob:
Wing shift +/- 0.5Å in 0.1Å increments.
FWHM:
Not specified. Prominence units are generally 0.6Å or
above, Chromosphere units generally 0.5Å or below.
Objective:
Air spaced two element ED Apo, fully multicoated.
Aperture:
66mm
Focal Length: 936mm with focal point 94mm behind 1.25” flange.
Barlow:
Integrated, fully baffled 2 element telecentric 2.4X barlow
optimized for 656nm
Blocking filter: Integrated 18mm blocking filter
Clear aperture: 19mm clear etalon aperture
Full disk:
Full disk visible for eyepieces more than 18mm FL or
image sensors more than 9mm tall (1” format or larger).
Full disk in smaller sensors requires focal reducer.
Focuser:
Dual speed crayford style, with 10:1 reduction and lock.
Eyepiece side: 2”-24 UNS “SCT” thread
1.25” female drawtube via included adapter with
brass compression ring to protect eyepiece.
Mounting foot: Vixen style dovetail with two ¼-20 holes.
Power:
USB power, 5v 1.5amp, female Micro-B connector.
Power is required for proper operation.
Wall adapter:
90-240VAC wall adapter, includes US, UK, Euro and
Australian plugs.
Opt. battery:
Optional 8-hour battery pack available.
LED indicator: Yellow: temperature settling.
Green: ready to observe, filter on band.
Red: fault such as low voltage.
Settling time:
Approximately 5-15 minutes after power up or change
of wing shift.
Temperature:
Ambient temperature range 40°-100°F
Dimensions:
126mm wide x 110mm tall x 446mm long
Weight:
2.3kg (4lb 15.5oz)
Includes:
SolaREDi 66 telescope, power supply, user manual.
Warranty:
5 years
