background image

Warranty: 

Blockers and trimmers are considered a  wear item and only  warranteed 
on a pro-rated five year term. 
 
Warrantor: 
DayStar Filters LLC 
Elements  of  Warranty:  DayStar  warrants,  for  five  years  of  the  original 
retail  purchase  owner,  this  Product  to  be  free  from  defects  in  materials 
and workmanship with only the limitations or exclusions set out below. 
Warranty  Duration:  This warranty  to  the  original  user  shall  last  for  one 
year  of  the  original  user.  The  warranty  is  invalid  if  the  Product  is  (A) 
damaged  or  not  maintained  as  detailed  in  Operating  and  Maintenance 
Manual  (B)  modified,  altered,  or  used  as  part  of  any  conversion  kits, 
subassemblies,  or  any  configurations  not  sold  by  DayStar,  or  (C) 
serviced  or  repaired  by  someone  other  than  the  DayStar  Filters  Service 
Center  for  a  defect  or  manlfunction  covered  by  this  warranty.  This 
warrantee  includes  shipping  to  and  from  any  point  inside  the  United 
States. Insurance upon that shipping and/or international shipping and/or 
any customs and/or import duties attached are the sole responsibiltiy 
of the owner. 
Statement of Remedy: In the event that the product does not conform to 
this  warranty  at  any  time  while  this  warranty  is  in  effect,  warrantor  will 
repair the defect and return it to  you without charge for parts, service or 
any cost incurred by the warrantor in connection with the performance of 
this  warranty.  THE  FIVE  YEAR  WARRANTY  SET  FORTH  ABOVE  IS 
THE  SOLE  AND  ENTIRE  WARRANTY  PERTAINING  TO  THE 
PRODUCT  AND  IS  IN  LIEU  OF  AND  EXCLUDES  ALL  OTHER 
WARRANTIES  OF  ANY  NATURE  WHATSOEVER,  WHETHER 
EXPRESS,  IMPLIED  OR  ARISING  BY  OPERATION  OF  LAW, 
INCLUDING  BUT  NOT  LIMITED  TO  ANY  IMPLIED  WARRANTIES  OF 
MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR  PURPOSE. 
THIS  WARRANTY  DOES  NOT  COVER  OR  PROVIDE  FOR  THE 
REIMBURSEMENT 

OR 

PAYMENT 

OF 

INCIDENTAL 

OR 

CONSEQUENTIAL DAMAGES. 
Procedure for obtaining performance of warranty: Upon discovery of 
flaw, we require that the user communicate by telephone and/or email to 
the  DayStar  Service  department  to  report  the  failure  of  equipment. 
Should  technical  support  be  unable  to  resolve  the  conflicts  of  the 
product, it should be packaged in its original packaging and returned with 
evidence  of  original  purchase  and  note  describing  defect  to  include 
owner  contact  information.  The  product  should  be  shipped  freight  pre-
paid by traceable means or delivered to warrantor at: 
 
DayStar Filters LLC 
149 Northwest OO Highway, Warrensburg, MO 64093 USA 
www.DayStarFilters.com - 1 (866) 680-6563 

Summary of Contents for SolaREDi 66

















Reviews: