Page 5
For technical questions, please call 1-888-866-5797.
Jack Stand
Maintenance and Servicing
Procedures not specifically
explained in this manual must be
performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM TOOL
FAILURE:
Do not use damaged equipment.
If abnormal noise or vibration occurs, have
the problem corrected before further use.
1. Periodically clean the bottom of the Bases and
top of Posts of any dirt, grease, or debris.
2.
Before each use,
inspect the general condition
of the Jack. Check for broken, cracked, or bent
parts, loose or missing parts, and any condition
that may affect the proper operation of the
product.
Do not use damaged equipment.
Discard Jack Stand if damaged or deformed.
3. Periodically lubricate release handle pivot points.
