background image

Page 2

For technical questions, please call 1-888-866-5797.

Item 57664 

        

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol.  It is used to alert you to 

potential personal injury hazards.  Obey all safety messages 

that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,  

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in minor or moderate injury.

Addresses practices not related to personal injury.

IMPORTANT SAFETY INFORMATION

Read all safety warnings and instructions.  

Failure to follow the warnings and instructions may result in serious injury.  

 

Save all warnings and instructions for future reference.

1.  Study, understand, and follow all instructions 

before operating this device.

2.  Do not exceed rated capacity.

3.  Use only on hard, level surface, 

such as concrete slabs.

4.  Lifting device only.  Immediately after lifting, 

support the vehicle with appropriate means.

5.  Use caution if lifting with Toe. Toe must be 

positioned against a secure lifting point. Load must 

be centered on Toe. Only lift on solid surfaces.

6.  Do not adjust safety valve.

7.  Wear ANSI-approved safety goggles and 

heavy-duty work gloves during use.

8.  Keep clear of load while lifting and lowering.

9.  Lower load slowly.

10. Do not use for aircraft purposes.

11.  Apply parking brake and chock 

tires before lifting vehicle.

12. Lift vehicle only at manufacturer-

recommended locations.

13. Inspect before every use; do not use 

if parts loose or damaged.

14. Keep your work area clean and well lit.  

Cluttered work areas invite accidents.

15. Keep bystanders, children, and visitors away while 

operating Jack.  Distractions can cause you to 

lose control.  Protect others in the work area.

16. Stay alert.  Watch what you are doing, and use 

common sense when operating a jack.  Do not use 

a jack while tired or under the influence of drugs, 

alcohol, or medication.  A moment of inattention while 

operating jacks may result in serious personal injury.

17. Store idle jacks out of reach of children 

and other untrained persons.  Jacks are 

dangerous in the hands of untrained users.

18. Jack service must be performed only by 

qualified repair personnel.  Service or 

maintenance performed by unqualified 

personnel could result in a risk of injury.

19. When servicing a jack, use only identical replacement 

parts - refer to attached, product-specific parts list 

and diagram.  Follow instructions in the “Inspection, 

Maintenance, And Cleaning” section of this manual.  

Use of unauthorized parts or failure to follow 

maintenance instructions may create a risk of injury.

20. Maintain labels and nameplates on the Jack.  These 

carry important information.  If unreadable or missing, 

contact Harbor Freight Tools for a replacement.

21. Before use, read manufacturer’s instruction 

manual for the vehicle (or object) you will lift.

22. When lifting only one wheel, support the load 

immediately with one jack stand (not included) 

placed under the side of the vehicle being lifted.  

Align the saddle of the jack stand directly under 

the vehicle’s seam or recommended lifting point.

Summary of Contents for DTJ10T









Reviews: