DAX66 KEYPAD FEATURES
Numeric LED Display
Treble up/down LED
Ext/Mute/PA selection LED
Volume up/down LED
Source selection LED
Bass up/down LED
Infrared (IR) target
Up, volume, treble, bass, un-mute
Source select 1 ~ 6 descending
Power ON/OFF & mode select
Press and hold for zone on/off, press
to toggle through volume, source,
treble and bass adjustment mode.
Use the select button with the volume
up/down buttons to adjust volume levels,
treble and bass levels
Down, volume, treble, bass, un-mute
The select button emits a soft glow
when the zone is powered off
Source select 1 ~ 6 ascending
daytonaudio.com
info@daytonaudio.com
The DAX66 keypad is designed for ease of use with a maximum ability to control sound. Soft-touch backlit buttons and a backlit LED
display provide convenient control of the zone; ON/OFF, source 1 ~ 6 selection, volume, treble, and bass. A built-in IR target or
external IR target connected to the EXT-IR terminals on the rear of the keypad, relay commands to the DAX66 master controller.
Dedicated IR output jacks provide remote source control of the source equipment. The built-in IR target also provides complete zone
control when using the DAXRC infrared remote control. One DAXRC is included with each system, and additional DAXRC are
available from your Dayton Audio dealer.
Five LEDs on the keypad face indicate the operation mode of the keypad. The EXT LED indicates that the system is receiving a
trigger command from an external device.
