17
DAYVA PREMIERE OUTDOOR HEATER
TROUBLE SHOOTING
PROBLEM 2
Large Yellow Candling Flame
CAUSE
This can occur after a period of non-use. Most likely
debris, dirt or a spider web has gotten into the orifice.
SOLUTION
CLEAN THE ORIFICE
1. Remove the hood and emitter by removing the (4)
screws that attach the emitter screen to the burner plate.
2. For easier access, also remove the top section of the
post. This can be accomplished by first removing the
regulator from the hose. Then remove the top neck
portion from the post.
3. With phillips screwdriver, remove the bracket holding
the thermocouple and electrode (igniter) in place. Once
removed, push both to the side, free from the burner.
4. With channel locks, remove each screw (2), located
directly under the burner, by turning counter-clockwise.
5. Pull burner free from burner plate.
6. The Orifice will now be exposed.
7. Examine for debris, dirt or spider webs and clean as
necessary.
* Make sure not to push obstruction farther down orifice.
8. Once cleaned, re-assemble burner to burner plate,
thermocouple and electrode to bracket, top neck section
to post and regulator to hose.
9. Make sure to use teflon tape when re-attaching
regulator.
10. Check for leaks (refer to Solution for Problem 1,
Cause A).
11. Re-light heater to test.
Please also reference the Instruction Manual for further
Trouble Shooting information.
If neither Trouble Shooting Giude remedies the problem,
please contact your Dayva retailer or Dayva International.
1
2
3
REMOVE WITH
CHANNEL LOCKS
TURNING
COUNTER-CLOCKWISE
4
ORIFICE
