RE-1100cc Double-seat buggy Owner’s Manual Version: 3.0 Dec. 2006
70
Tire replacement
When replacement is necessary, observe following steps :
１）
Park the vehicle on a flat ground. If replacement needs to be
made on public road, park the vehicle on the road side and
place a warning sign board 10 meters behind the vehicle, turn
on the flickering lamp;
2) Turn off the engine and remove the key from the vehicle;
3) Shift the gear to 1
st
or reverse position.
4) Get all the passengers off the vehicle;
5) Slightly lift the wheel up by using a jack;
6) Remove the 4 lock bolts and lock nuts from the rim;
7
）
Remove the old wheel and replace with a new wheel;
8
）
Fasten the 4 lock bolts and lock nuts.
9
）
Check tire pressure with precise tire gauge under normal
air temperature.
10) After examining tire pressure, tighten the bonnet.
Locking Bolts/nut Bonnet
