Dazon Raider Pro 250 S, Service Manual

Raider Pro 250 (single-seat / double-seat): Service Manual                                    EEC Version: 1.0  Oct.. 2004 

 10

  soaked the washer and thread part, rotate the spark plug; 

b. Clear up the filth and carbon accumulation on the spark plug with a steel brush or a blade; 
c. Inspect the spark plug gap (in general it should be about 0.6 - 0.7 mm.); 
d. If the carbon accumulation or the wear of the spark plug is too serious, replace the spark plug 

with a new one of the same specification. 

2.2.2 Tire Pressure / Wear 

Check the tire pressure before each of your driving.   
The tire pressure is very important for the riding stability. 

   Specifications:  Front Tire: 175kpa 
                 Rear Tire: 200kpa 
 

2.2.3 Brake Performance      

a.  Always check if there is plenty of brake fluid in the brake fluid   

reservoir; 

b. Check if the front/rear brake pad is in good condition; 
c. Check the brake rotor for abnormal wear. 

2.2.4 Air Cleaner 

Clean the air cleaner quarterly, or more often when driving in dusty conditions.

If the air cleaner is clogged with dust, its performance will be   
severely decreased, even the engine damages will probably be   
caused.  
 
Inspection and Cleaning of Filters 

Paper Filter                                                                                                   

a. Remove the filter from its housing; 

b

. Lightly tap the filter on an object to knock out the dust; 

c. Replace the filter element if it is wrinkled or torn. 

Foam Filter 

a. Remove the filter out of its steel cage; 

b. Wash the filter in non-flammable cleaning solvent; 
c. Submerge the filter in oil and squeeze it to remove excess oil; 
d. Install the filter element back into the air box. 

1. Before and during the cleaning, inspect the element for tears; replace it if it’s torn. 

2. Make sure that the element is seated properly and no foreign material can pass by it