DB Drive A7PRO 2.5K User Manual Download

Page: 5 / 6

8 ~ 2 ohms

CLASS D MONO AMPLIFIERS’ SPEAKER CONNECTION DIAGRAM 2

www.dbdrive.net

4. TROUBLE SHOOTING

NO SOUND ( NO OUTPUT )

1) Please check all connections, cables’ routing, short and voltage at amplifier and headunit.

2) Please check built-in or external fuses, If it is brown, please repalce with new one.

3) Please check whether speakers work well, you can test speakers by connecting to another amplifiers.

PROTECTION

1) Please check overload, overheat ( thermal ) , short, voltage and DC offset.

2) Minimum working impedance for 1 ohm

3) If the amplifier is shut down due to overheat, Reset by turning off the remote input and allowing time to

cool down.
Please make sure there are no airflow obstructions around amplifier to prevent thermal protection.

WHINING NOISE

1) Engine noise is caused by poor grounding of amplifier, headunit, other components, battery or

alternator, so please check all grounding connections.

Summary of Contents for A7PRO 2.5K






