AW_DD650_manual_G04_150923.ai 20 2015/9/23 16:12:40
Parameter
Description
Remarks
SAMPLE
LOAD
Download wave samples to
drum module from the
external USB flash drive.
See the note below
.
KIT SAVE
Save a user kit data of drum
module to the external USB
flash drive.
The saved file name is
MyKitxxx.kit.
KIT LOAD
Save back a user kit data of
USB flash drive to the drum
module.
Transmit the MyKitxxx.kit
file from the USB flash
drive to the drum module.
FORMAT
Format the USB flash drive.
Strongly recommend
formatting the USB flash
drive once before using it.
Using USB Flash Drive (USB Memory)
The USB flash drive function contains:
1.
Sample/ Kit load or save. Transmit data between USB flash drive
and drum module.
2.
Format. Format the USB flash drive.
Note:
This digital drum supports 4G~64G USB flash drive which in FAT
format. Brand Kinston and SanDisk are suggested.
1.
In the KIT menu, select the
“USB MEMORY” item.
Press the [ENTER] button, enter to the USB flash drive menu.
2.
Press the [
∧
]/ [
∨
] button to select the USB flash drive function that
you want.
C
M
Y
CM
MY
CY
CMY
K
Sample Load
Wave sample on the USB flash drive can be downloaded/saved to the
drum module in this function. These voices are called user voices.
1.
There is no limitation of sample capacity except exceeding internal
memory.
Sample’s size can reach to 15M Byte.
2.
Requirement of Sample wav's format: mono 16 bit, 48k / 44.1k /
32k / 22.05k / 11.025k rate.
3.
Samples in internal memory can only be deleted as a whole. One
sample deleting is not permitted except that there is only one
sample.
4.
Both loaded samples and preset voices can be used in the same
way.
Enter the
“SAMPLE LOAD” interface. The LCD will list all wave files
(.wav) which under the sample catalogue. It can display 99 files at
most.
Select a sample from the USB flash drive:
Press the [ENTER] button to enter load interface:
Press the [ENTER] button again:
20