28
DVA KS10
Code 420120233 REV. 1.0
English
1. Disconnect all connections, including the power supply one.
2. Wait for 5 minutes.
3. Replace the fuses with the included ones in the package for the 100-120 V range.
•
The speaker is supplied with pre-installed fuses designed to operate within the 220-240 V
range. Should it need to operate within the 100-120 V range:
11. MAINS FUSE
Mains fuses housing
•
Only use cables equipped with high-quality connectors. Using cables equipped with
poor-quality connectors might affect speaker operation.
•
Never use the speaker for a prolonged time while the limiter LED is on or frequently blinking,
indicating the equipment is running under excessive stress conditions
ATTENTION
!
9. MAINS INPUT
Power supply connector for cable equipped with powerCON connector.
10. MAINS LINK
Connector for power supply link. The nameplate
shows the maximum and total current
and power of a linked system
The table below shows a diagram summarising the LED behaviour during certain speaker operation stages.
LED TYPE SPEAKER
SWITCH-ON
NORMAL
OPERATION
GENERIC
WARNING
STOP DUE TO
SPEAKER MALFUNCTION
LIMITER
OFF
OFF, IT STARTS
BLINKING ONLY
IN DISTORSION
CASE
TEMPORARY
BLINKING
ONGOING CYCLIC BLINKING
SIGNAL
OFF
BLINKING WITH
SIGNAL
NORMAL INPUT
AUDIO INDICA-
TION
OFF
MUTE/
PROT
ON FOR A
FEW SECONDS
OFF
TEMPORARY
BLINKING
STEADILY ON
READY
OFF
STEADILY ON
STEADILY ON
OFF
