34
DVA KS10
Code 420120233 REV. 1.0
English
The main controls available to the user on the control panel are Xover (crossover frequency), Delay (with
a range of 0-4.5 ms and a resolution of 0.5 ms), and Phase (can be set to either 0° or 180°). For information
on which settings to use in the various potential configurations (e.g. Cardioid, End-fire, line-array), refer to
the DVA COMPOSER.
CONFIGURATION AND OPTIMISATION
The DVA KS10, used alone, is a subwoofer characterised by its omnidirectional acoustic emission.
This behaviour is clear at lower frequencies, but becomes less well-defined as the frequency increases.
When used in a line-array and when used with other subwoofers, a series of controls are needed to optimise
the acoustic performance of the subwoofer and of the entire array.
