DBI SALA Flexiguard 8530595, User Instruction Manual

14

LabeLs

The following labels must be present on the Flexiguard SafRig Fall Arrest System. Labels must be replaced if they are not fully 

legible. Contact Capital Safety for replacement labels.

WARNING

• ALL USERS MUST READ AND UNDERSTAND THE INSTRUCTIONS PRIOR TO USING 

THIS SYSTEM.

• RETRACTABLE DEVICES AND SHOCK ABSORBERS USED WITH THIS PRODUCT MUST 

HAVE AN AVERAGE ARRESTING FORCE OF NOT GREATER THAN 900 LB (4 KN) AND  

MEET ANSI Z359.14 TYPE B OR Z359.13 RESPECTIVELY.

• DO NOT EXCEED THE MAXIMUM NUMBER OF USERS RATING.

• NO MORE THAN ONE PERSON IS ALLOWED TO BE ATTACHED TO A GLIDE RAIL 

TROLLEY OR ANCHOR POINT AT ANY GIVEN TIME.

• 

DO NOT EXCEED THE RECOMENDED SAFE WORKING ANGLE OF 30˚AS SHOWN IN 

FIGURE 1. FAILURE TO WORK WITHIN THE SAFE WORKING AREA MAY CAUSE 

SERIOUS INJURY OR DEATH.

• BE CAUTIOUS OF OVERHEAD POWER LINES OR OTHER ELECTRIC SOURCES WHICH 

CAN CAUSE ELECTRIC SHOCK.

• IF YOU HAVE ANY QUESTIONS OR CONCERNS ON THE USAGE, CARE, OR 

SUITABILITY OF THIS EQUIPMENT, PLEASE CONTACT CAPITAL SAFETY BEFORE 

USING IT.

• SUPPORTING STRUCTURES FOR THIS SYSTEM MUST BE CERTIFIED AND CAPABLE 

OF SUPPORTING THE ENTIRE WEIGHT OF THE CONFIGURED SYSTEM ALONG WITH 

ANY LOADS THAT COULD POTENTIALLY BE INTRODUCED IN THE EVENT OF 

ARRESTING A FALL. 

• ONLY USE THIS SYSTEM ON LEVEL GROUND.

9509036  REV A

SAFRIG FALL PROTECTION SYSTEM

OPERATORS INSTRUCTIONS

THIS MAN-RATED SYSTEM IS DESIGNED FOR A MAXIMUM OF

USER CAPACITY IN ACCORDANCE WITH MANUFACTURER’S 

INSTRUCTIONS.  FAILURE TO COMPLY MAY RESULT IN SERIOUS 

INJURY OR DEATH.

FIGURE 1

PERSON

TM

THIS SYSTEM MEETS OR EXCEEDS ALL

APPLICABLE OSHA & ANSI STANDARDS.

30° MAX 

SAFE

WORKING

ANGLE

17’-7” MAX 

WORKING

RADIUS

1

30° MAX 

SAFE

WORKING

ANGLE

15’-4” MAX 

WORKING

RADIUS

8530579

8530595

WEIGHTS

INDIVIDUAL COMPONENTS:

DAVIT - 

550 lbs. [249 kg]

C/W BASE - 

5,000 lbs. [2268 kg]

I-BASE -

 1,300 lbs. [590 kg

TOTAL SYSTEM:

8530579 - 

1,850 lbs. [839 kg]

8530595 - 

5,550 lbs. [2517 kg]

All Models

WARNING

PLACE 9504547 

ID LABEL HERE

9512505 REV A

PORTABLE COUNTERWEIGHTED JIB BASE SYSTEM WITH 

CENTER MOUNTED SLEEVE 

OPERATORS INSTRUCTIONS

TM

FORK POCKETS

LEVELING JACK 

MOUNTS

(JACKS OPTIONAL)

• DO NOT USE THIS SYSTEM UNLESS IT HAS BEEN FILLED WITH 4000 PSI CONCRETE.

• DO NOT FILL THE DAVIT SLEEVE WITH CONCRETE. PLUG HOLE WHILE FILLING BOX.

• ALL USERS MUST READ AND UNDERSTAND THE INSTRUCTIONS PRIOR TO USING THIS SYSTEM.

• DO NOT TRANSPORT AT SPEEDS GREATER THAN 5 MPH / 8 KPH. 

• PLEASE SEE DAVIT WARNING LABEL TO DETERMINE SAFE NUMBER OF USERS. 

• NO MORE THAN ONE PERSON IS ALLOWED TO BE ATTACHED TO A GLIDE RAIL TROLLEY OR ANCHOR POINT AT ANY GIVEN TIME.

• BE CAUTIOUS OF OVERHEAD POWER LINES  OR OTHER ELECTRIC SOURCES WHICH CAN CAUSE ELECTRIC SHOCK.

• DO NOT USE THIS SYSTEM UNLESS THE SLOPE INDICATORS ARE INDICATING 2° OR LESS OF SLOPE.  THE LEVELING JACKS (IF SUPPLIED) 

SHOULD BE USED TO LEVEL THE SYSTEM WITHIN THE 2° REQUIREMENT.

• ENSURE EQUIPMENT USED TO TRANSPORT THIS SYSTEM HAS SUFFICENT CAPACITY.

• IF YOU HAVE ANY QUESTIONS OR CONCERNS ON THE USEAGE, CARE, OR SUITABILITY OF THIS EQUIPMENT, PLEASE CONTACT CAPITAL 

SAFETY BEFORE USING IT.

• SUPPORTING STRUCTURES MUST BE CERTIFIED AND CAPABLE OF SUPPORTING THE ENTIRE WEIGHT OF THE CONFIGURED SYSTEM 

ALONG WITH ANY LOADS THAT COULD POTENTIALLY BE INTRODUCED IN THE EVENT OF A FALL.

• WHEN TRANSPORTING THIS SYSTEM USING THE LIFTING EYES, ALWAYS LIFT FROM ALL FOUR POINTS EVENLY. DO NOT STAND BELOW 

THE SYSTEM WHILE IT IS BEING LIFTED OR TRANSPORTED.

DAVIT SLEEVE

CONCRETE

LIFTING EYES

SLOPE INDICATORS

8530595, 8530606

9509030 Rev. A

APPROXIMATE WEIGHT

1,850 LBS / 839 kg

WARNING

8530579, 8530607

9512507 REV A

APPROXIMATE WEIGHT

5000 lbs / 2,268 kg

WARNING

8530595, 8530606

All Models