DBK PWS 115-500 E, Original Operating Instructions

13

GB

8. Replacing the power cable

If the power cable for this equipment is damaged, it
must be replaced by the manufacturer or its after-
sales service or similarly trained personnel to avoid
danger.

9.  Cleaning, maintenance and ordering

of spare parts

Always pull out the mains power plug before starting
any cleaning work.

9.1 Cleaning

Keep all safety devices, air vents and the motor 
housing free of dirt and dust as far as possible. 
Wipe the equipment with a clean cloth or blow it 
with compressed air at low pressure.

We recommend that you clean the device 
immediately each time you have finished using it.

Clean the equipment regularly with a moist cloth 
and some soft soap. Do not use cleaning agents 
or solvents; these could attack the plastic parts
of the equipment. Ensure that no water can seep
into the device.

9.2 Carbon brushes

In case of excessive sparking, have the carbon 
brushes checked only by a qualified electrician.
Important! The carbon brushes should not be rep
laced by anyone but a qualified electrician.

9.3 Maintenance

There are no parts inside the equipment which 
require additional maintenance.

9.4 Ordering replacement parts

Please quote the following data when ordering
replacement parts:

Type of machine

Article number of the machine

Identification number of the machine

Replacement part number of the part required

Safety guard for cutting (Art. No.: 44.500.04)

10. Storage

Store the equipment and accessories out of children’s
reach in a dark and dry place at above freezing
temperature. The ideal storage temperature is
between 5 and 30 °C. Store the electric tool in its
original packaging.

11. Disposal and recycling

The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.

Anleitung_PWS_115_500_E_SPK7:_  01.06.2010  15:43 Uhr  Seite 13