ROIP302 Series User menu
as provided by your ISP to complete this LAN port configuration.
The PC Port allows other network devices to be attached to the GoIP4 Gateway. It offers both
Bridge and Static IP modes to meet your requirements. The factory preset is Static IP mode with
the IP address 192.168.8.1.
1
)
Bridge Mode
Select
Bridge
mode if your network topology requires the network devices (PC or others) to be
in the same network segment as the GoIP4 Gateway. In this case, the GoIP4 Gateway functions
as an Ethernet Switch.
2
)
Static IP Mode (Default Setting)
Select
Static IP
mode for a new network segment on PC port. In this case, the GoIP4 Gateway
functions as Router. Enter the IP address in
IP Address
field with a new segment address that is
different from that on the LAN port. Enter the subnet mask in
Subnet Mask
field accordingly.
A commonly used value is 255.255.255.0.
Enable the
DHCP Server
if you want the GoIP4 Gateway functions as a local DHCP host on PC
port. This will enables the GoIP4 Gateway to assign IP Addresses to network devices that are
attached to the PC port.
www.dbltek.com