background image

®

2-Way, 3-Way

4-Way Crossovers

223/223XL - 234/234XL

W

ARRANTY

I

NTRODUCTION

Congratulations on your purchase of the dbx 223/223XL or 234/234XL
crossover. We are confident you will find this crossover to be the finest
product of its kind in this price range. We have taken care to include all of
the features you need to make your system sound its best. Some of the
features common to both the 234/234XL and the 223/223XL crossovers
are:

• back panel switches for selecting the operating mode of the

crossover.

• back panel switches indicating the selected range of crossover fre-

quencies. Both of these features have LED indicators on the front
panel so you can see at a glance which mode the unit is in.

• low frequency summed output designed specifically for mono sub-

woofer applications.

• phase invert switches on all outputs.
• individual level controls on every output.

We are sure you will agree that these crossovers are built to provide
extremely high quality frequency division for all applications.

2

1. The warranty registration card that accompanies this product must be

mailed within 30 days after purchase date to validate this warranty.
Proof-of-purchase is considered to be the burden of the consumer.

2. dbx warrants this product, when bought and used solely within the

U.S., to be free from defects in materials and workmanship under nor-
mal use and service. 

3. dbx liability under this warranty is limited to repairing or, at our discre-

tion, replacing defective materials that show evidence of defect, provid-
ed the product is returned to dbx WITH RETURN AUTHORIZATION
from the factory, where all parts and labor will be covered up to a peri-
od of two years. A Return Authorization number must be obtained from
dbx by telephone. The company shall not be liable for any consequen-
tial damage as a result of the product's use in any circuit or assembly.

4. dbx reserves the right to make changes in design or make additions to

or improvements upon this product without incurring any obligation to
install the same additions or improvements on products previously
manufactured.

5. The foregoing is in lieu of all other warranties, expressed or implied,

and dbx neither assumes nor authorizes any person to assume on its
behalf any obligation or liability in connection with the sale of this prod-
uct. In no event shall dbx or its dealers be liable for special or conse-
quential damages or from any delay in the performance of this warran-
ty due to causes beyond their control.

Summary of Contents for 223/223XL

















Reviews: