dbx Professional Products • 8760 South Sandy Parkway • Sandy UT 84070 • Phone (801) 568-7660 • Fax (801) 568-7662
Int’l Fax (801) 568-7583 • email: customer@dbxpro.com • URL: http://www.dbxpro.com
Crown and JBL are registered trademarks of their respective companies.
Analog Inputs:
Number of Inputs:
(2) Line inputs. (1) RTA Mic input
Connectors:
(2) Female XLR line inputs. XLR RTA
Mic input
Type:
Electronically balanced/RF filtered
Impedance:
> 40k
Ω
Max Input Line Level:
+34dBu w/input jumpers in +30 position
CMRR:
> 45dB
RTA Mic Phantom Voltage:
+15VDC
RTA Mic EIN:
< -110dBu, 22Hz-22kHz, 150
Ω
Analog Outputs:
Number of Outputs:
6
Connectors:
Male XLR
Type:
Electronically balanced, RF filtered
Impedance:
120 ohms
Max Output Level:
+22dBu
A/D Performance:
Type:
dbx Type IV conversion system
Dynamic Range line:
>114 dB A-weighted, >112 dB
unweighted
Type IV Dynamic Range:
>119 dB, A-weighted, 22kHz BW
>117 dB, A-weighted, 22kHz BW
Sample Rate:
48kHz
D/A Performance:
Dynamic Range:
112 dB A-weighted, 110dB unweighted
System Performance:
Dynamic Range:
>110 dB unweighted, >107dB weighted
THD+N:
0.002% typical at +4dBu, 1kHz, 0dB
input gain
Frequency Response:
20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk:
>110dB, 120dB typical
Crosstalk Input to Output:
>100dB
Safety Agency Approvals:
UL 6500, IEC 60065, EN 55013, E 60065
SPECIFICATIONS
DriveRack
™
260
Complete Equalization and Loudspeaker Management System
www.dbxpro.com
Front
Rear
Featuring
Custom Tunings
18-0152 -A 9/02
The System Solution
setup powered by
The Professional’s Choice In Signal Processing
™
DriveRack 260 brochure2 12/10/02 11:07 AM Page 1
