46
®
Utility
The Utility menu allows you to edit global system parameters and provides system information.
Utility Parameters
The Utility menu is accessed by pressing the
UTILITY
button. Turn the
DATA
wheel to scroll through the list of parameters.
Press the
DATA
wheel to edit a selection.
•
SYSTEM INFO
Selecting this option displays important PA2 system information, such as the currently installed firmware version, network IP
address, and Mac address. You can also view this system information via the System Info Home screen. See
‘The Home
Screens’ on page 13
for more information on this feature.
•
LCD CONTRAST
[0% - 100%]
Adjust this parameter to vary the contrast of the LCD display. Use it to make the LCD display more visible under different
lighting conditions.
•
TIME OUT
[10s, 30s, 1min, 2min, 3min, 4min, 5min, 10min, DISABLED]
This parameter sets the time that it takes for the PA2 to return to the Home screen after a period of inactivity, or whether
the PA2 will return to the Home screen at all (DISABLED).
•
MUTES POWERUP
[CURRENT, MUTE ALL]
This option determines whether the PA2 will boot with the output mute settings last used when the device was powered
down (CURRENT) or if it will always boot with all outputs muted (MUTE ALL).
•
SECURITY
Select this option to edit your administrative password. The default password is ‘administrator’. Changing the password to
anything other than the default password will enable the Security feature. When enabled, the PA2 will require a password
before it can be controlled over a network using the DriveRack PA2 control app. Follow the on-screen instructions to edit
the password. Changing the password back to ‘administrator’ will disable the Security feature.
•
SALES BANNER
[ON, OFF]
Turns the Sales Banner on or off. The Sales Banner is used for display purposes only.
Summary of Contents for DriveRack PA2
Page 1: ...Owner s Manual...
