48
®
System Lockout
This power-up function locks out the PA2’s front panel controls to prevent unauthorized tampering. The following options are
available:
•
System Unlocked
This is the default setting and allows access to all PA2 functions from the front panel controls.
•
System Locked
When this option is selected, all front panel controls will be locked and a “LOCKED” message will appear in the LCD display
whenever any button is pressed or the DATA wheel is turned.
•
System Locked with AFS Filter Clear
When this option is selected, all front panel controls will be locked with the exception of the AFS filter clear function. To
clear the AFS filters when this option is selected, press the
AFS
button to enter the AFS menu then press and hold the
AFS
button until the AFS filter clear prompt appears in the LCD display.
•
System Locked with AFS Filter Clear and Mutes
This option is similar to the “System Locked with AFS Filter Clear” option listed above. When this option is selected, all front
panel controls will be locked with the exception of the AFS filter clear function and output mutes. To clear the AFS filters
when this option is selected, press the
AFS
button to enter the AFS menu then press and hold the
AFS
button until the
AFS filter clear prompt appears in the LCD display.
To change the System Lockout option:
1�
Press and hold the
RTA
button then power on the PA2. Keep the button pressed until the System Lockout menu appears
in the LCD display then release the button.
2�
Turn the
DATA
wheel to highlight the desired option.
3�
Press the
DATA
wheel to select the highlighted option.
4�
When prompted, press the
RTA
button to confirm the selection. The PA2 will boot up and operate according to the
System Lockout option selected. Pressing any button other than the
RTA
button will abort the procedure and maintain the
setting selected prior to entering the System Lockout menu.
Summary of Contents for DriveRack PA2
Page 1: ...Owner s Manual...
