- 13 -
1.6 Data display range of various parameters:
TIME: 0:00
– 99.59(MIN)
DISTANCE: 0.00
– 99.9(KM)
CALORIES: 0.0
– 999 (KC)
SPEED: 1.0
– 20.0(KM/H)
PULSE: 50
– 200 (BPM)
1.7. Heart rate measurement function
While the treadmill is connected to the power, hold the pulse tester for 5s and the
heart rate value will be displayed. The initial value is the actually measured heart rate,
and its display range is: 50-200 times/ minutes. In the heartbeat measurement
process, there will be a heart shaped icon flashing.
Heart rate displayed is for reference only and can not be used as medical data.
1.8. Manual Modes
1.8.1. How to enter manual mode:
A. Switch on the power supply; then, directly enter normal mode under the manual
mode.
B. In stop state, press MODE to select Normal mode, Time Countdown, Calorie
Countdown and Distance Countdown modes under the manual mode.
1.8.2. Setting functions under manual mode: Time, Distance and Calorie Setting
A. When entering the manual mode, the time is displayed as 0:00;
B. In manual mode, press MODE to enter
Time Countdown mode
; the time window
will display the time and flicker; the initial time is 30:00; set countdown time by
SPEED +/ SPEED -. Time setting range: 5:00-99:00;
each time of increase/
decrease will be 1: 00.
C. In time countdown mode, press MODE to enter
Distance Countdown mode
; the
initial distance will be displayed as 1.00 km; set the distance by SPEED +/ SPEED -
in the range of 1.0-99.0 km/mi; each time of increase/ decrease will be 1 km.
D. In distance countdown mode, press MODE to enter
Calorie Countdown mode
; the
initial distance will be displayed as 50.0kcal; set the calorie by SPEED +/ SPEED - in
the range of 20.0-990.0 kcal; each time of increase/ decrease will be 10.0 kcal.
1.8.3. Operation in manual mode:
A. Press START and the motor will start operating after 3s of countdown; the initial
speed will be 1.0km/h for metric system or 0.6mile/h for imperial system;
B. Press SPEED +/ SPEED - to adjust speed;
C. Press speed shortcuts to quickly set up to the speed marked on the key;
D. When the motor is running, press STOP and the motor will slow down and stop
finally;
E. Remove the safety lock to urgently stop motor running; then, LCD window will
display “---” and the buzzer will make short sound of Bi-Bi-Bi.
F. When the set time reduces to zero or when the set calorie reduces to zero, or the set
distance reduces to zero, the speed will gradually reduce till the stop of the machine,
the buzzer will make short alarm “Bi-Bi-Bi”, and the speed window will display END;
5s later, the machine will return to the standby state and the buzzer will make long
Summary of Contents for Performance 5.0
Page 1: ...Performance 5 0 MANUAL...
Page 24: ...23 EXPLODED DRAWING...