2 |
P a g e
Operation
:
See photo above: Connect power to the DC-25TZ-3 (only use the 12VDC wall power
supply that is provided) to the power jack located on the side of the enclosure.
See photo above: Connect the rechargeable battery backup. The battery backup is
located on the rear portion of the enclosure behind a 2.5 inch x 1.75 inch plate. Note:
This is a
rechargeable
9 volt battery. Allow 24 hours of recharge time for full charge.
When power is first applied to the DC-25TZ-3, all 3 time zones will display 12:00 am
(12 hour mode) and 00:00 (24 hour mode)
Power
connection
9V
Backup
Battery Panel
*only use
rechargeable
9V batteries
