EtherSeries EMB-02 User’s Guide
32
2.
Start your Web browser.
3.
In the
Address
box of your browser, enter the following:
http://IP_Address
(IP_Address
is the IP address of the gateway)
For example, if the default IP address has not been
changed, then you would enter the command:
http://192.168.1.1
If you can't connect
If it does not respond, check the following:
•
The gateway is properly installed, LAN connections are
OK, and it is powered ON.
•
Check that your PC is using a compatible
IP Address
and
Network Mask
.
In Windows98, using Control Panel-Network to examine
the Properties for the TCP/IP protocol can check the IP
Address and Network Mask.
If your PC is NOT using an IP Address within the range
192.168.1.2 to 192.168.1.254, with a Network Mask of
255.255.255.0, it will not be able to communicate with the
gateway.
4.
Once connected, you will see the first screen. Refer to the
following section for details on using the Web-based
interface.
Summary of Contents for EMB-02
