Configuration
19
D Delete Remote IP Address
3 Gateway IP Address
4 Subnet Mask
5 Name of Contact Person
6 Device Name
7 Physical Location
8 Port Number
9 IP Fragmentation [0=ALLOWED, 1=NOT ALLOWED]
0 -- Return to previous menu
Enter Command => 0
1. Local IP Address
The IP address of this Ether
Poll
device on your LAN. The
default IP Address is 192.168.1.1
2. Show Remote IP Address List
Display a list of all configured remote Etherpoll IP addresses.
A. Add Remote IP Address
Add a remote IP address to the address list.
D. Delete Remote IP Address
Delete a remote IP address from the address list.
3. Gateway IP Address
If the remote EtherPoll is not on the same LAN, then the
gateway to the other LAN must be entered here.
4. Subnet Mask
The network mask indicates what class of TCP/IP network you
have. The default value is for a class “C” network, with up to
Summary of Contents for EtherPoll
