EtherSeries DNP- 3 Gateway User’s Guide
Entering Data
Enter the number of the field you wish to change, followed (on
the same line) by a space and the data for that field.
Example
On screen one, to set the IP address (field 1) to 192.168.1.10
=>1 192.168.1.10
Menu Options
Main Menu Option 1.
Setting IP Addresses
Selecting 1 (
1 Local IP Address
) from the Main Menu will
result in a screen which is similar to the following.
LOCAL UNIT CONFIGURATION:
Local Address: 205.166.54.137 Serial NO:
00:60:E9:00:47:9E
Gateway Address: (NOT SET) Subnet Mask:
255.255.255.0
IP Fragmentation: ALLOWED
Ethernet Mode: Auto
SET LOCAL UNIT CONFIGURATION:
1 Local IP Address
2 Subnet Mask
3 Gateway IP Address
4 IP Fragmentation [0=ALLOWED, 1=NOT ALLOWED]
5 Ethernet Mode [0=Auto, 1=100Mb-Full, 2=100Mb-
Half, 3=10Mb-Full, 4=10MB-Half]
0 -- Return to previous menu
EXAMPLE: To set local IP address to 192.168.0.100
=> 1 192.168.0.100
Enter Command =>
14
Summary of Contents for EtherSeries EDNP-3
