EtherSeries DNP- 3 Gateway User’s Guide
Port packets rcvd: 0 0
Port Receive errors: 0 0
Dest addr errors: 0 0
Source addr errors: 0 0
TCP Host List
[Press any key to continue]
This option displays the configuration and some operational
counters. A list of TCP hosts recently contacted is also
included.
Main Menu Option R.
Reset Configuration to Default
Selecting (R) from the Main Menu will restore all values to
their default values.
If using Telnet or web browser configuration, the connection
will be lost when the hardware reboots. To reconnect, you must
use the default IP Address of 192.168.1.1 or change the IP
address before rebooting with main menu option 6. The
preferred method is to restore defaults with menu item 8, and
then
BEFORE REBOOTING
, change the IP information by
using submenu 1 so your PC will still be able to connect to the
gateway when it reboots.
26
Summary of Contents for EtherSeries EDNP-3
