MANUALE D’USO - USER MANUAL - SA9500
dcg16.it
ASSEMBLY INSTRUCTIONS
1. Use bolt M8X16 (BB)and washer Ф8(FF) to install the
wheel Assembly(H) on the base (G), and use washer
8(FF) and nut M8(AA) to tighten; use bolt M6X10(LL) and
washer Ф6 (NN) to install the ground pins(PP) on the
base and tighten with nut M6(OO);
Hardware Used
2. Use the connection part(MM) and bolt M6X10(LL) to
connect the Cylinder Housing(F) to the base(G), and fix it
with bolt M8X16(BB).
Hardware Used
Nur M8 X2
Bolt M8X16 X2
Washer Ф8 X4
Bolt M6X10 X6
Washer Ф6 X6
Flange Nut M6 X6
Ground pin X3
Bolt M8X16 X3
Bolt M6X10 X3
Connection par X3
