MANUALE D’USO - USER MANUAL - SA9500
dcg16.it
5. Connect the assembled upper and lower parts,connect the burner assembly(D) and the Cylinder
Housing(F) with bolts M5X10(HH) and nuts M5(II).
Hardware Used
6. Attach regulator to gas line and tank.
• Fit the gas regulator rubber hose with the end thread of
• inlet gas steel pipe and tighten the nut.
• Connect the regulator with the LPG gas tank in counter- clockwise direction and tighten it by
adjustable wrench. • Put LPG gas tank into stand.
• Do not store a spare LPG gas cylinder under or near this appliance; • Never fill the cylinder beyond
80 percent full;
• Place the dust cap on the cylinder valve outlet whenever the cylinder is not in use. only install the
type of dust cap on the cylinder valve that is provided with the cylinder valve. Other type of caps
or plugs may result in leakage of propane.
Bolt M5X10 X4
Nuts M5 X4
6
HH
II
5
Bolt M5X10 X4
Nuts M5 X4
6
HH
II
5
