Use the controllers
Take a few minutes to get familiar with the controllers. During training you will
use the controller to follow the directions given.
1. Right menu button
2. Right trigger
3. Grip button
4. Battery cover
5. Toggle
6. VIVE button
7. B button
8. A button
Hover
- Hold the virtual hand over an object or menu option.
Select a menu option
- Hover over a menu option and click the trigger (2).
Pick up and hold objects
- Hover over an object and click the trigger (2).
Release an object
- Press the grip button (3).
Teleport
- Toggle (5) up to activate the teleportation line. Aim the line at your
target until it turns green. Release the toggle to move to the new location.
View the training objectives
- Press the left or right menu button (1).
Change settings
- Press the VIVE button on the right controller (6).
Adjust the Headset
1.
Make sure that the headset cable is connected to the Link box. The headset
LED should be green.
2.
Loosen top straps and headband on the headset.
3.
While holding the visor with one hand, pull up the band.
4.
Hold the visor to your eyes. The visor fits over most glasses. Adjust the
position and focus of the visor until you see a clear image inside the
headset. The focus dial is on the front right corner of the visor.
5.
Pull down the headset band around the back of your head until you hear a
click and adjust straps and bands until the headset fits snugly and does not
shift when you move your head.
6.
Press the headset button on the side to power it on.
- 4 -
