D
IGITAL
C
ONTROL
I
NCORPORATED
9
DigiTrak Falcon F5 iGPS Supplement A
Upload White Line to PC
Upload a white line to a PC in much the same way you upload a DataLog file:
1. In LWD 3.04, open the desired LWD job.
2. Click
Manage GNSS White Lines
.
3. Click
Import
.
4. On the receiver, select a White Line job from the list.
5. In LWD, click
Connect to Device
to upload the job.
6. Repeat for each White Line job. Multiple White Lines can be attached to one LWD file and
selectively displayed later on Google Earth maps.
7. To exit the job list on the receiver, toggle up at the top of the list.
If your version of LWD does not have a Manage GNSS White Lines icon, contact DCI customer service for a
software upgrade.
White Line Job List
LWD and WL (White Line) job numbers on the receiver are simply sequential; they do not
correspond and are not connected to each other. Ensure you upload White Lines to the correct
DataLog in LWD, or the White Line and bore will display in different geographic locations. To
view a White Line without associating it to any drill data, import it into a new blank LWD job.
