2
2
I
MPORTANT
I
NFORMATION
•
If you have any questions or concerns regarding this document, the hardware you have received
or the requirements of your Camatics Insurance Policy, please contact you broker immediately.
•
Before you begin installing and commissioning the system, please ensure that you have read this
manual thoroughly, referring to any supplementary information provided for the unit as
required.
•
Care must be taken in the routing of all cables so that the insulation does not become worn or
damaged.
•
Unauthorised modification to this equipment or associated accessories is forbidden without the
expressed permission and agreement from the product manufacturer.
•
This equipment should not be operated in hazardous environments i.e. areas that contain
explosive materials or flammable vapours.
•
This equipment should not be operated within aircrafts or in close proximity to medical
equipment.
•
This equipment may only be located in a position where it cannot interfere with the normal
operation of the vehicle or present a hazard to the driver or passengers.
•
Failure to comply with the following Warnings, Approval and Safety information may invalidate
warranty, certification or type approval of this product.
•
All installation and service work must be carried out in accordance with FCS1362, FCS1372,
RQAS, 95/54/EC, ISO 21609 and / or any other statutory guidelines or Directives currently in
force. Therefore it is strongly recommended that the unit is installed and commissioned by
suitably trained and qualified installation personnel with accreditation.
•
Under no circumstances may any part of the product be installed inside the engine
compartment area.
•
Unauthorised changes or alterations to the equipment or the installation will invalidate
certification issued by the Approved Accreditation Bodies and may also affect the vehicle
manufacturers warranty
