DCLCD
DCL20 Page5
THIS PRODUCT HAS BEEN TESTED FOR COMPLIANCE WITH
REGULATORY SAFETY CERTIFICATIONS
This product is designed and manufactured to operate within defined design
limits, and misuse may result in electric shock or fire. To prevent the product
from being damaged, the following rules should be observed for the
installation, use and maintenance of the product. Read the following safety
instructions before operating the display. Keep these instructions in a safe
place for future reference.
To avoid the risk of electric shock
or component damage, switch off
the power before connecting other
components to the DCL20 LCD
MONITOR.
Unplug the power cord before
cleaning the DCL20 LCD
MONITOR. Do not use a liquid or a
spray cleaner for cleaning the
product. Do not use abrasive
cleaners.
Always use the accessories
recommended by the manufacturer
to insure compatibility.
When moving the DCL20 LCD
MONITOR from an area of low
temperature to an area of high
temperature, condensation may
form on the housing. Do not turn
on the DCL20 LCD MONITOR
immediately after this to avoid
causing fire, electric shock or
component damage.
Do not place the DCL20 LCD
MONITOR on an unstable cart,
stand, or table. If the DCL20 LCD
MONITOR falls, it can injure a
person and cause serious damage
to the appliance. Use only a cart or
stand recommended by the
manufacturer or sold with the
DCL20 LCD MONITOR.
Any heat source should maintain a
distance of at least 5 feet away
from the DCL20 LCD MONITOR,
i.e. radiator, heater, oven, amplifier
etc. Do not install the product too
close to anything that produces
smoke or moisture. Operating the
product close to smoke or moisture
may cause fire or electric shock.
Slots and openings in the back and
bottom of the bezel are provided
for ventilation. To ensure reliable
operation of the DCL20 LCD
MONITOR and to protect it from
overheating, be sure these
openings are not blocked or
covered. Do not place the DCL20
LCD MONITOR in a bookcase or
cabinet unless proper ventilation is
provided.
It is not recommended to use the
DCL20 LCD MONITOR in a
portrait format (by rotating 90
degrees) under high temperature
environment (25°C or higher),
since this would retard heat
dissipation and would eventually
damage the monitor.
Never push any object into the
ventilation slots of the DCL20 LCD
MONITOR. Do not place any
objects on the top of the Product. It
could short circuit parts causing a
fire or electric shock. Never spill
liquids on the DCL20 LCD
MONITOR.
The DCL20 LCD MONITOR
should be operated only from the
type of power source indicated on
the label. If you are not sure of the
type of power supplied to your
home, consult your dealer or local
power company.
Summary of Contents for DCL20
Page 3: ...DCLCD DCL20 Page3 ...