ENGLISH
31
• Set the temperature indicator to the one corresponding to
the fabric. Always check the label of the garment before
choosing the temperature setting.
• Place the iron on its heel and wait until the temperature pilot
light goes out. The iron is now ready for ironing.
STEAM IRONING
• Fill the water tank (variable steam indicator at position ).
• Plug the iron into the mains.
• Choose the required temperature.
• Turn the variable steam control between and depending
on the amount of steam required.
• If you want continuous extra steam, hold the selector
down in the position and release it if the there is
enough steam.
• Put the iron on its heel and wait until the temperature pilot
light goes out.
Attention:
set the temperature indicator within the steam
range (•• or •••). If the temperature is too low, the soleplate
Type of fabric
Temperature indicator
Steam ironing
Nylon
Synthetic
(e.g. acetate,
acrylic, viscose,
polyamide, polyester…)
MIN/OFF
|
•
|
Silk
Wool
|
••
|
Cotton
Linen
|
•••
|
MAX
Care and cleaning
|
•••
|
