dCS Vivaldi Transport
User Manual
Software Issue 1.2x
April 2015
Vivaldi Transport Manual v1_2x
Page 15
English
version
Area
2
: When in play or pause modes, the current track number & track/disc time (hours, minutes,
seconds) is shown.
When stopped, the number of tracks & total disc time is shown.
PGM
is displayed here when a track sequence is programmed and the disc is stopped. For example,
8PGM3
indicates that a sequence of 3 tracks has been programmed and the last one is track 8.
Area
3
: The icon defines the time that is displayed, set by the remote
Display
button:
Track time elapsed
Disc time elapsed
Track time remaining
Disc time remaining
Area
4
: The status icons are displayed here:
SACD loaded
CD loaded
Locked to Word Clock input
Wrong clock detected
Repeat the current track
Repeat the whole disc
Settings are locked
Details of the menu displays are shown in the Menu section on page
X
19
X
.
To avoid unnecessary display wear, we recommend switching off or setting the unit to
Sleep mode at the end of the listening session.
21B
Power
Button
To switch on, ensure the rear panel switch is set to
I
and press the
Power
button (C) on the front
panel once. Note that the unit cannot be turned on from the remote control.
To set the unit to sleep mode, press the
Power
button once. The main display will turn off, the LED
over the button will illuminate and the mechanism will stop, but the unit will remain close to running
temperature. If the tray is open, it will close automatically. Press again to return to normal operation.
To switch off, hold down the
Power
button for about 5 seconds until
SWITCHING OFF
appears on the
display, then release it. If the tray is open, it will close automatically.
When the menu is open, press the
Power
button to close the menu.
22B
Menu
Button
Press the
Menu
button (D) to open the menu, select menu pages and change settings. See the Menu
section on page
X
19
X
for information on using the menu features.