3/16” (4mm)
1/16"
(2mm)
1/16"
(2mm)
2 5/8”
(67mm)
FLUSH
2" x 4"
(or similar)
2" x 4"
(or similar)
FLUSH MOUNT
SECTION
9
INSTALLATION INSTRUCTIONS
FLUSH INSTALLATION
A frame should be constructed 2 ” (51mm) setback from the front face of the product to both push the product
up against and to conceal the cutout clearance around the front frame as below. The internal dimensions of the
frame should be the same dimension as the proud installation cutout (fig 02A).
WARNING
Do not seal the product in with silicone or similar. Doing so will result in the product being difficult to remove for
servicing.
Minimum 3/16” (4mm) cutout
clearance around the front frame
