ddrum BETA XP2, Manual

Power Supply

•  Do not share the power supply with other 

electronics that can produce cable statics, for 

example, electric motors.

•  It is normal for direct current (DC) to produce 

heat with extended usage, and there is no need 

to be worried.

•  Before connecting the module to other 

electronics, always turn off the power to prevent 

damage.

Placement/Location

•  Operating the module near a post-amplifier or 

machines that use High-power converters, buzzing 

may result. To prevent this problem, please 

change the module’s facing direction, or place the 

machine away from the interrupting sources.

•  This machine may interfere with the radios and 

televisions. Please do not operate the module 

near them.

•  Do not place the module under sun, or near any 

heat source, as high temperature may cause the 

module or components to deform or discolor.

•  To prevent permanent damage, please do not 

expose the module or components to moist or in 

humid environments.

Maintenance

•  For normal cleaning, please use soft cloth with 

little or no moist for wiping. For tougher spots, use 

neutral-pH and wear-free cleaner then use dry soft 

cloth to wipe clean.

•  Never use volatile oil, diluting solutions, alcohol, 

or any other kinds of solvents to prevent the 

machine from deforming or discoloring.

Additional Precautions

•  During operation, please handle with care to 

prevent any damage. Do not hit or press against 

the display screen. 

•  Always grab the heads of cables during in-

sertion/removal to prevent damage to the cables 

or the machine.

•  To prevent disturbing your neighbors, please 

operate the machine at an acceptable volume, or 

use a headphone, especially at night.

•  Although this electronic drum set is designed to 

minimize unwanted noise during operation, the 

percussive sound may still pass through the floor 

or walls, resulting in unexpected noise.Please be 

careful not to let such sound disturb your neighbors, 

especially at night.

•  When transporting, please use the original or 

similar packaging and box.

•  Please use official cables for connection. When 

using cables from other companies, please note 

the following:Some cables may consist of resistors, 

which may be incompatible and result in extremely 

low volume.  For information about the specifications 

of cables, please consult with the manufacturer. 

•  Please do not hit the pads with excessive force to 

prevent the risk of hurting your fingers.

Precautions

Please read the following precautions aside from the safety in-

structions

5