8
USE
• Before use, clean “LE TUBE” with hot soapy water.
• Remove the nozzle cap.
• Fit the chosen nozzle to the nozzle cap.
• Ensure that the piston is at the top (piston pulled
completely to the top).
• Fill the chamber with your preparation holding LE
TUBE upside down by the neck (
1
);
•
Re-fit the nozzle cap.
• Push the piston rod to remove any remaining air
in the chamber and to push the preparation into the
nozzle (
2
).
• Adjust the quantity to be measured using the knob.
(
1
) The cursor moves and the measurement marks
show you the volume (
2
).
• It is possible to readjust or change the measure-
ment at any time using the knob.
•
Position the end of the nozzle on the item to be decorated or filled.
• Press the handle.
1- Filling the chamber
2 – Adjusting the quantity to be measured
3- Garnishing
1
2
1
2
+
-
Suits for mousses, creams, soft pastes . Do not
use with too compact or hard pastes at the risk
of damaging the mechanism. Do not force on
the mechanism if the piston rod doesn’t come
down when you press the handle.
