background image

Page 4/14

ROTARY MOWER | User manual

December 2020

1.

USING THE MOWER (FA1200, FA1500, FA1500XL, 
FA1800, FA1800XL or FA2100XL)

The mower must be connected to the tractor or a comparable piece of equipment (hereinafter called the 
machine) using a three-point mounting frame. 

The working width is determined by the type and identifier of the mower. 

The mower can be used for grass and leaves on sports fields, parks, gardens, grass fields, etc. where there are 
no stones, etc., that may injure people and that may cause machine damage! 

Only use and follow the manual of the BOXER mower. 

Note the danger symbols and pictograms and the recommendations indicated by labels on the machine. 

Every 10 working hours, lubricate the lubrication points that are earmarked “grease” (5x). 

Inspect the mower for excessive dirt and damage before you begin mowing. 

Make sure the chain guard on the back is working properly in connection with the danger of ejection of hard 
bits such as stones, etc. 

Always drive down slopes in a straight line and not at a slant (only if the tractor is equipped with a ROPS cab). 

Model

hp

kW

Weight (kg)

FA1200

12-40 

9-30

130

FA1500

18-40 

13.5-30

153

FA1500XL

18-50

13.5-37.5 

200, heavy-duty model

FA1800

22-50

16.5-37.5

205

FA1800XL

22-50

16.5-37.5

235, heavy-duty model 

FA2100XL

22-60

16.5-45

330, heavy-duty model

Summary of Contents for BOXER AGRI FA Series















Reviews: