Safety reference: All codes are to be
securely stored. Do
NOT use personal data
(i.e. Birthdays, telephonenumbers, etc) as a
code. Change the factory code before you
start using the safe!!!
Manual DRS Combi Fire private safes
EM 2020
Setting the time delay and opening window time
Continuation: open with time delay
You can only change or delete the delay setting during the open
window time.
Enter a valid code. After the delay period the opening window
will start. The light flashes 1x a second and
beeps.
•
Press and hold
“9”
until a double signal sounds. The
light will illuminate when performing the following
actions.
•
Enter your manager code (see the previous step) You
’
ll
hear a double signal
(Pay attention! The code underneath is an example)
•
You can delete the delay and opening window
by
entering
00 for the delay setting and 01 for the
opening window time
.
•
Enter the delay setting and opening window again to
delete the setting.
Time delay:
The time between the first and second code
entry in minutes.
Open window time:
The period of time in minutes during
which the code can be entered a second time and the lock
can be opened.
Changing or deleting the time delay values can only
be done in open window time.
Press and hold
‘9’
until a double signal sounds. The LED
will illuminate when performing the following actions:
•
Enter your manager code
You
’
ll hear a double signal
•
Enter the delay setting and opening window time.
Time delay
min. 01
-
max. 99 minutes.
Open window time
min. 01
-
max. 99 minutes.
In this example: 2602 for
a delay of 26 minutes
and
a opening window time of 2 minutes
.
(Pay attention! The code underneath is an example)
•
Enter the delay setting and opening window time
again.
(Pay attention! The code underneath is an example)
Open with time delay
Deleting the delay setting
Enter the code (i.e. 1
-
1
-
1
-
1
-
1
-
1), after entering a right
code, a double signal sounds an time delay starts. Durin
time delay expires the light flashes every 10 seconds. After
time delay has elapsed a double signal sounds and the
open window starts,
During the open window the light flashes and the lock
beeps every second. To open the lock a valid code has to
be entered again during the open window. After entering a
right code a double signal sounds. You can unlock the door.
If the lock is not open within 3 seconds the lock will auto-
matically lock again. If the open window expires without
entering a valid code the lock is secured again with time
delay.
If the lock is set to dual combo one valid code starts time
delay. During the open window two valid codes have to be
entered to open the lock.
Press a random key to break off time delay.
