69
SUZUKI
GSX 1300R Hayabusa
: Assembly Guide
Push the reflector into the recessed
area, making sure it is secure.
Place the back of one reflector into
the recessed circle of one of the
reflector mounts.
Place the hole in the left reflector
mount over the hole in the left fork
from which the 2.3 × 8mm screw
was removed in Step 1.
Remove one of the discs from the
adhesive sheet and place it onto
the back (silver side) of one of
the reflectors. Repeat this for the
second reflector. Then remove the
backing from the adhesive disc.
Repeat this process with the second
reflector and reflector mount.
5
4
7
3
6
Left
Right
Align the area around the hole
of the reflector mount with the
recessed section of the bracket at
the end of the fork.
8
Use the cross wrench to tighten the
2.3 × 8mm screw into place.
Align the holes and insert the 2.3 ×
8mm screw removed in Step 1.
10
9
Turn the front forks over and fix the
right reflector mount in place.
11
Insert one of the 2 × 11mm lag
screws into the hole at the end of the
damper shaft, as shown.
12
