Page 14 of 68
INDUSTRIAL PUMPS
www.
debem.com
Chapter 2 - Introductory Information
Translation of Original Instructions - BOXER rev.
2021
2.1 PUMP IDENTIFICATION
2.1.1
For any communication with the Manufacturer or authorised After-Sales Centers, always specify the data shown
on the identification plate of the pump.
The identification plate contains the following data:
1. Manufacturer’s Identification;
2. Manufacturer’s address and contact numbers;
3. Pump name;
4. Type and Composition Code of the pump;
5. ATEX Marking;
6. IECEx Marking;
7. Identification code (serial number);
8. Year of manufacture:
ATEX: STANDARD - CONDUCT version
IECEx: CONDUCT
version
CAUTION
The Identification Plate and the Declaration of Conformity contain very important data for recog-
nising the composition materials of the pump
(4. Type and Composition Code of the pump)
that
are essential for correctly assessing the chemical compatibility with the fluid to be used. The
shown data indicate the ATEX or IECEx execution class
(see ATEX Marking or
IECEx
marking)
for
the correct assessment of compatibility with the workplace.
IT IS FORBIDDEN to remove and/or alter the identification plate and the data it contains; removal
involves forfeiture of the warranty.
2.1.2
The number of this manual is written on the cover. Make a note of the revision code and keep it so that, in case of
loss, you can request a new copy.
