3
USAGE & SAFETY
DeBug Beach Wheelchair should not be used during inclement weather,
dangerous surf, rough ocean currents, rip tides and any other poor conditions.
The DeBug is not intended to be used in the water. It is not a flotation device!
We recommended the chair be used only when a lifeguard is present. Safety
comes first!
Users must always be accompanied by a responsible, able-bodied adult.
Always maintain control of your DeBug while in use. When the DeBug is
not in use, the safety brakes must be engaged to prevent the chair from
moving unexpectedly.
The DeBug was built to not tip over, even when used over uneven surfaces.
However, to ensure safety and prevent injury, the user must always wear the
seatbelt while using the DeBug. This is imperative to the user’s safety.
Do not use the components of the DeBug Beach Wheelchair for any purpose
other than what is intended. Do not have more than one person using the DeBug.
Safety Warning
Using your DeBug Beach Wheelchair
General Maintenance
It’s so easy to maintain your DeBug Beach Wheelchair! Just follow these simple
instructions, and you will be able to enjoy your chair year after year.
Rinse the chair off with clean water to remove any sand or debris after each use.
The sling material is removable and machine washable.
Check tire pressure before each use. These wheels are meant to be pliable and
somewhat “soft” to the touch. Recommended tire pressure is 2.5 to 4 PSI. These
specifications are molded on each wheel.
If at any time you need to lubricate any part of the chair, DO NOT USE WD-40,
as it will attract dirt and sand, causing possible damage to the wheel bearing/
bushings. We recommend P.T.F.E Dry Lube, on all wearing components. This dry
film is a superior lubricant and repels debris and water, marine and performance
parts stores likely stock this locally.
Have any questions, or need additional support? Please don’t hesitate to
contact us!
Phone 850.478.5765 | Email
