DeBug ADB400, Manual And Safety Instructions

4

ASSEMBLY COMPONENTS

Click 

here

 to view a video on assembling the DeBug Beach Wheelchair

5/16”-18tp x 2-1/4” SS REAR 

SUSPENSION BOLT

1/4”-20tp x 1-1/4” SS 

BACKREST BOLT (2 EACH)

1/4”-20tp x 2-1/2” SS MAIN 

AXLE BOLT (2 EACH)

5/16” LEG REST 

ADJUSTMENT KNOB (2 EACH)

1” SS MAIN AXLE FLAT  

WASHER (2 EACH)

1/8” SS MAIN AXLE 

HITCH PIN (2 EACH)

REMOVABLE ARMREST

OPTIONAL DRINK HOLDER

LEG REST 
ADJUSTMENT KNOBS

1/4”-20 x 1-1/4” S.S. HEX BOLT 
2 EACH FOR BACKREST OR  
OPTIONAL 1/4” QUICK 
RELEASE PIN

5/16”-18 x 2-1/4” S.S. HEX BOLT 
1 EACH FOR REAR SUSPENSION 
OR 6/16” QUICK RELEASE  
PIN OPTION

1/4”-20 x 2-1/2” S.S. HEX BOLT 
2 EACH FOR MAIN AXLE

ASSEMBLING INSTRUCTIONS

1.   Slide on the leg support sling, and install 

the two 5/16”-18 adjustment knobs

2.  Slide on the foot plate, and tighten the leg 

rest adjustment knobs

3.  Install the mid axle, tighten the two 

attaching 1/4”-20 bolts

4.  To install the backrest, slide the backrest 

down on the chair frame and attach using 
the two 1/4”-20 bolts

5.  The rear suspension may be attached by 

inserting the rear suspension tension bolt. 
This bolt should be tight during use.

DISASSEMBLING INSTRUCTIONS

1.  Loosen the leg length adjustment knobs 

and slide out the footplate

2.  Slide off the leg support sling by removing 

the two 5/16”-18 adjustment knobs

3.  To remove the mid axle, loosen the two 

attaching 1/4”-20 bolts

4.  To remove the backrest, remove the two 

attaching 1/4”-20 bolts and slide up on  
the backrest

5.  The rear suspension may be detached by 

removing the rear suspension tension bolt. 
This bolt should be tight during use