DeBug Mobility Products
www,beachwheelchair.com
850-478-5765
To start using your Multi Terrain Walker
1. Unbox The Walker and remove all packaging paper
2. Remove the Zip ties that suspend the rear wheels during shipping
3. Open the hardware bag and remove the nylon insert nuts from the rear wheel
bolts
4. Insert the rear wheel assembly into the rear Walker tubes as shown in photo
above
5 .Insert the rear wheel bolts, secure with their nylon insert nuts and hand tighten
nuts
6. Using a flat Edge like 3 foot yardstick align the wheels so they are parallel.
Tighten the nuts to secure the rear wheels
7. Insert the right and left handles, adjust the desired height and secure with knobs
included Hardware bag. Generally, the optimal put handle height is just above
the hip of the user
8. The brake handles squeeze to break, and push down to lock
